Mechanical, electrical, and swelling properties of ethylene propylene diene monomer composites reinforced with recycled tungsten oxide under gamma irradiation
Document Type
Article
Publication Date
Summer 8-15-2026
Abstract
Developing multifunctional elastomeric composites with enhanced mechanical, dielectric, and radiation-resistant properties is essential for advanced engineering applications. In this study, recycled tungsten trioxide (WO3) derived from heavy alloy scrap was incorporated into EPDM rubber at loadings of 4–20 phr. The inclusion of WO3 markedly improved the composite performance, with optimal properties achieved at 15 phr, where tensile strength, elongation at break, and hardness increased significantly compared to neat EPDM. Swelling measurements indicated reduced solvent uptake, higher polymer volume fraction, and lower molecular weight between crosslinks, confirming the formation of a denser network structure. Under gamma irradiation (5–200 kGy), neat EPDM showed increased swelling due to chain scission, whereas WO3-filled composites exhibited enhanced crosslinking at low doses and delayed degradation at higher doses. Dielectric studies revealed increased permittivity, dielectric loss, and DC conductivity with filler content and irradiation, while maintaining electrical stability suitable for antistatic applications. Overall, the combination of recycled WO3 and controlled gamma irradiation yielded sustainable EPDM composites with superior mechanical properties, improved radiation resistance, and stable dielectric behavior, demonstrating strong potential for automotive, electronic, and radiation-shielding applications.
Recommended Citation
Zidan, H. M.; El-Nashar, Doaa E.; Ward, Azza A.; and Salama, E., "Mechanical, electrical, and swelling properties of ethylene propylene diene monomer composites reinforced with recycled tungsten oxide under gamma irradiation" (2026). Basic Science Engineering. 240.
https://buescholar.bue.edu.eg/basic_sci_eng/240