Submissions from 2022
Inventory Control for Liquid Products by Using Internet of Things, Noha Mostafa, Sara Sherif, and Alaa Adel
Three Dimensional CFD Simulation Model with Experimental Validation of Silica Gel–Water Pair Adsorption Cooling Bed, hesham safwat and taher halawa
Development of a Soft Robotic Gripper for Carpet Handling, Anwar Sahbel and Ayman Abbas
Development of a Soft Gripper Using a NonFluidic Compliant Mechanism, Anwar Sahbel, Ayman Abbas, and Andrew Adel Nasif
Investigation on Offshore Floating Mooring Chains Failure, Serag Salem
Responses of an axially rotated tube versus twisted tube design as two solutions to enhance the thermal performance under a non-uniform heat flux condition: A numerical study, Andrew S. Tanious, Ahmed A. Abdel-Rehim, and Ahmed A. Attia
Submissions from 2021
Investigation of Active Disassembly in Large Force Applications, Ayman Abbas Prof, Hoda Abuzied, Mohamed Awad, and Hesham Senbel
A Simulation Study of the Effect of Post-Combustion Amine-Based Carbon-Capturing Integrated with Solar Thermal Collectors for Combined Cycle Gas Power Plant, Ayman Abbas Prof, Amir Ayyad, and Nabil Elminshawy
Investigation of the tribological behavior of mineral lubricant using copper oxide nano additives, Ahmed A. Abdel-Rehim, Sayed Akl, and Sherif Elsoudy
Recent advances in preparation and testing methods of engine-based nanolubricants: A state-of-the-art review, Sayed Akl, Sherif Elsoudy, Ahmed A. Abdel-Rehim, Serag Salem, and Mark Ellis
An experimental study of a hemi-spherical solar collector under Egyptian climate, mohamed ebaid, Salma Salah, and Ahmed A. Abdel-Rehim
Performance and economical analysis of different insulating materials used to reduce the heat load of an existing residential building, Radwa A. EL-AWADLY and Ahmed A. Abdel-Rehim
Investigating the Performance of a New Type of Multi-Element Airfoil for Wind Turbine Blade, Ahmed Elbaz
Natural convection in triangular fin-shaped Cavity with partially heated base using Nanofluid, Ahmed Elbaz
Facile Synthesis of Hybrid Electrode Materials Based on RGO.Ag/Co for an Efficient Symmetric Supercapacitor, Iman El-Mahallawi, Waleed Khalifa, Ahmed Selim, and Mohamed Zahran
Study of Solidification Thermal Analysis, Microstructure and Mechanical Characteristics of A384 Cast Alloy Treated with Rare Earth (Sm, Tb, Ce and La) Elements, Iman El-Mahallawi, Mahmoud Tash, and Waleed Khalifa
Effect of dust and high temperature on photovoltaics performance in the new capital area, Engy Elshazly, Ahmed A. Abdel-Rehim, AMR ABDEL KADER, and Iman El-Mahallawi
Study on tribological behaviour of zno nano additives suspended in SAE 20W-50 engine oil, Sherif Elsoudy, Sayed Akl, Ahmed A. Abdel-Rehim, and Serag Salem
A comparison between flat-plate and evacuated tube solar collectors in terms of energy and exergy analysis by using nanofluid, Mahmoud A. Eltaweel
Energy and exergy analysis for stationary solar collectors using nanofluids: A review, Mahmoud Eltaweel and Ahmed A. Abdel-Rehim
Optimization of Strength and Toughness for Hot-Forged Bainitic Medium Carbon Steel Using RSM, Tamer Adel Mohamed, Iman S. El-Mahallawi, Abdelwahab A. Hussein, Ahmed Yehia Shash, and Taha Mattar
Adjusting the logistic function to develop a more realistic product life cycle model, Tamer Adel Mohamed, Noha A. Mostafa, and Seif El Din Abdel Rehim
Adjusting the logistic function to develop a more realistic product life cycle model, Noha Mostafa, Seif El Din Abdel Rehim, and Tamer A. Mohamed
A Mobile-Based Social Platform for Emergency Response Coordination, Noha Mostafa, Abdalla Ashraf, and Amr Eltawil
Smart Mobile Application for Short-Haul Cargo Transportation, Noha Mostafa, Ahmed Azab, and Jaehyun Park
Toward a Smart and Sustainable Campus: Future Vision, Opportunities, and Challenges, Noha Mostafa, amr eltawil, and Yoshihisa Matsushita
A Proposed Approach for Selecting Third Party Logistic Alternatives, Noha Mostafa, Asmaa Galal, and Hesham Elawady
Quality monitoring in multistage manufacturing systems by using machine learning techniques, Noha Mostafa, Mohamed Ismail, and Ahmed El-assal
Utilization of Machine Learning Techniques for Quality Monitoring and Prediction, Noha Mostafa, Mohamed Ismail, and Ahmed El-assal
A Combined Study Of Heat Transfer And Temperature Distribution Inside Heated Double-Wall Infant Incubator Using CFD, hesham safwat
CFD Investigation of the Optimal Ventilation System for a Single-Family Room Neonatal Intensive Care Unit, hesham safwat and Ahmed Elbaz
Fire-smoke control strategies in road tunnels: The effectiveness of solid barriers, hesham safwat and taher halawa
Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg castings: role of heat treatment, Serag Salem
Numerical investigation of the thermal performance of an axially rotating internally finned receiver tube of a parabolic trough concentrator, Andrew S. Tanious, and Ahmed A. Abdel-Rehim
Submissions from 2020
A Review of Advances in Design for Disassembly with Active Disassembly Applications, Ayman Abbas Prof, Hoda Abuzied, Mohamed Awad, and Hesham Senbel
Usage of shape memory alloy actuators for large force active disassembly applications, Ayman Abbas Prof, Hoda Abuzied, Mohamed Awad, and Hesham Senbel
A Novel Design of the Utilisation of Soft Grippers in Loading and Unloading Applications, Ayman Abbas Prof and Hazem El Banna
Investigating the Performance of a Novel Multi-element Airfoil Concept Using Numerical Analysis, Ahmed Elbaz
NUMERICAL INVESTIGATION OF FLOW OVER AN AIRFOIL WITH ACTIVE CAVITY, Ahmed Elbaz
Numerical investigation on the effect of surface perturbations on aerodynamics of cambered airfoils, Ahmed Elbaz
PERFORMANCE OF DARRIEUS WIND TURBINE USING SLOTTED BLADES WITH GURNEY FLAP, Ahmed Elbaz
Numerical investigation of Darrieus wind turbine with slotted airfoil blades, Ahmed Elbaz, Omar Sherif Mohamaed, Ahmed Abdelhamid Ibrahim, Ahmed Khaled Etman, and Amr A. Abdelfattah
Intrinsic Mechanisms of Self-Healing in Metallic Structures, Iman El-Mahallawi, Mohamed A. Ibrahim, Tarek Hatem, and Sarah Khalil
Energetic and exergetic analysis of a heat pipe evacuated tube solar collector using MWCNT/water nanofluid, Mahmoud Eltaweel and Ahmed A. Abdel-Rehim
Indirect thermosiphon flat-plate solar collector performance based on twisted tube design heat exchanger filled with nanofluid, Mahmoud Eltaweel, Hazem Hussien, and Ahmed A. Abdel-Rehim
Experimental and statistical study of the effect of temperature and waste ratio on the mechanical properties and cost of polystyrene polypropylene plastic blends, Tamer Adel Mohamed
An Intelligent Warehouse Management System Using the Internet of Things, Noha Mostafa, Walaa Hamdy, and Hesham Elawady
Toward low-cost, stable, and uniform high-power LED array for solar cells characterization, Anwar Sahbel, Minnatullah M. Hassan, Sameh Abdellatif, Hani Ghali, and Khaled A. Kirah
Submissions from 2019
The influence of electromagnetic field on the performance and operation of a PEM fuel cell stack subjected to a relatively low electromagnetic field intensity, Ahmed A. Abdel-Rehim
An innovative augmentation technique of savonius wind turbine performance, Ahmed Elbaz
Effect of FSP parameters and tool geometry on microstructure, hardness, and wear properties of AA7075 with and without reinforcing B4C ceramic particles, Iman El-Mahallawi
Production of AlSi12CuNiMg/Al2O3 Micro/Nanodispersed Surface Composites Using Friction Stir Processing for Automotive Applications, Iman El-Mahallawi, L. Tonelli, M. Refat, S. Toschi, M. M. Z. .Ahmed, Essam Ahmed, A. Morri, and L. Ceschini
Energy and exergy analysis of a thermosiphon and forced-circulation flat-plate solar collector using MWCNT/Water nanofluid, Mahmoud Eltaweel and Ahmed A. Abdel-Rehim
Experimental and Numerical Optimization of Magnetic Adhesion Force for Wall Climbing Robot Applications, Anwar Sahbel, Ayman Abbas, and Tariq Sattar
System Design and Implementation of Wall Climbing Robot for Wind Turbine Blade Inspection, Anwar Sahbel, Ayman Abbas, and Tariq Sattar
Submissions from 2018
An Experimental Investigation of Tribological Performance of a Lubricant Using Different Nano Additives, Ahmed A. Abdel-Rehim, Sayd Akl, and Sherif Elsoudy
Biodiesel production from castor oil in Egypt: Process optimisation, kinetic study, diesel engine performance and exhaust emissions analysis, Omar Aboelazayem, Nour Sh. El-Gendy, Ahmed A. Abdel-Rehim, Fatma Ashour, and Mohamed A. Sadek
NUMERICAL INVESTIGATION OF PERFORMANCE OF DUCTED DUAL ROTOR WIND TURBINE, Ahmed Elbaz
ENERGY COMPARISON OF AIR CONDITIONING SPLIT SYSTEM VS. SOLAR ABSORPTION SYSTEMS FOR A PROTOTYPE EDUCATIONAL BUILDING, hesham safwat
Submissions from 2017
Exploiting Modern Image Processing In Surface Flow Visualisation, Tarek Ihab Abdelsalam, Richard Williams, and Grant Ingram
Thermoelectric Behaviour of Polyvinyl Acetate/CNT Composites, Hussein Badr, Mostafa Amr Youssef, Hebatullah Sayed Abd Elsalam, Mirna Abd Elrahman, Mohamed Gamal El-kholy, Iman El-Mahallawi, and Ahmed A. Abdel-Rehim
Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy, Iman El-Mahallawi, Abdelrahman Abbas, Andrew Seif, and Waleed Khalifa
Centrifugal Casting of Al–Si Scrap, Iman El-Mahallawi, Aya Assem, and Shimaa El-Haddad
Estimation and Utilization of Landfill Gas from Egyptian municipal wastes, a case study, Ali Habib and Ahmed A. Abdel-Rehim
Submissions from 2016
An Experimental Investigation of the Effect of Aluminum Oxide (Al 2 O 3 ) Nanoparticles as fuel additive on the Performance and Emissions of a Diesel Engine, Ahmed A. Abdel-Rehim and Sayed Akl
Tribological Properties of Engine Lubricant With Nano-Copper Oxide as an Additive, Ahmed A. Abdel-Rehim, Sayed Akl, and Esraa A. Khafagy
Investigating the effect of Al2O3/water nanofluid on the efficiency of a thermosyphon flat-plate solar collector, Mohamed Nabil Negm, Ahmed A. Abdel-Rehim, and Ahmed A. Attia
Advanced Technologies for Sustainable Systems, Hesham Safwat
Submissions from 2015
Fabricating and Testing of a Thermoelectric Generator Based on Silicon Nanowires, Ahmed A. Abdel-Rehim and Ahmed A. Hamouda
An efficient meshless technique for the solution of transversely isotropic two-dimensional piezoelectricity, George S. A. Fam
The analog equation integral formulation for plane piezoelectric media, George S. A. Fam
Submissions from 2014
Comparative analysis between water and nanofluids as working fluids in photovoltaic thermal collectors, Ahmed A. Abdel-Rehim, Bahi A. Abdel-Mesih, and A. M. Khobeiz
An Experimental Study on the Effect of Using Fresnel Lenses on the Performance of Solar Stills, Tarek Ihab Abdelsalam and Bahy Saad Abdel-Mesih
Solar Energy for Rural Egypt, Tarek Ihab Abdelsalam, Ziad Darwish, and Tarek M. Hatem
Evaluation of Solar Energy Solution for Egyptian Remote Areas, Tarek Ihab Abdelsalam and Tarek M. Hatem
Submissions from 2013
Condition Monitoring of a Single Cylinder Engine Running on Gasoline and Gasoline-Ethanol Blend Using Wear Particle Analysis Technique, Sayed Akl and Ahmed A. Abdel-Rehim
Submissions from 2012
Comparative Analysis of Fuel Cell and Photovoltaic Panels as Electrical Sources for RO Desalination Domestic Scale Systems, Ahmed A. Abdel-Rehim, Bahy S. Abdel-Mesih, and Jamal E. Alostaz
Submissions from 2010
The impact of exit port design of a water piston IC engine on engine performance, Ahmed A. Abdel-Rehim and R Sylym